Formwork Metriform - Formwork Metriform Exporter, Manufacturer, Distributor, Supplier, Trading Company, Kolkata, India

Next >>

Product Code : DSCPL-06 Brand Name :DSCPL

Product Specification

Formwork Metriform

Wallform & Hardware

Conventional Wallform Shuttering

Concrete Hardware

Coil Ties, Water Seal Ties & Loops

Tie Bolts

Plastic Cones

Spring Coils

Assembly nut & bolts & wedge & clip to connect panels & soldiers

Wallforms and Flexible Panels

Typical Set-up using Splay Panels

CONVENTIONAL WALLFORM SHUTTERING

Back

Typical arrangement using CH. soldier

Consists of wallform panels made out of 12 gauge Sheet and M.S. Angel/Flat Frame, channel/ Heavy Duty Soldiers, Tubular/Channel walers & accessories. Panels supplied in 1.25m & Soldiers in 2.5m heights. For curved walls flexible panes are used, and heavy duty soldiers to be used in place of channel soldiers for single sided shuttering.

Double Adjuster Panel, Splay Panel, inter Corner Panel, External Corner Angle and Lap Angle etc., as also wallform accessories like Single clip, Double clip, Bridge clip, Assembly bolt and wedge / clip etc. are used for various applications of conventional wallform shuttering.

Typical arrangement using H.D. soldier

HARDWARE

Back

Concrete Hardware

Coil Ties, Water Seal Ties & Loops

Tie Bolts

Plastic Cones

Spring Coils

Assembly nut & bolts & wedge & clip to connect panels & soldie

Assembly nut & bolts & wedge & clip to connect panels & soldiers

Heavy duty Tie system

The capacity of this concrete heavy duty hardware system is upto 5T.

12 & 20 mm dia ties in lengths to suit wall thickness and
100 & 150mm Single and 225mm Double loops.

12 and 20 mm dia.

WALLFORM AND FLEXIBLE PANELS

Back

Wallform Panels

Flexible Wallform Panels

Internal Corner Panels

Double Adjuster Panels

Splay Panel

External Corner Angle

Height (mm)	Width (mm)
1250	500
1250	450
1250	400
1250	300
1250	250

Type	Size in mm
* 90^oInternal Corner Panel	1250 x 150 x 150
* 135^o Splay Panel	1250 x 200 x 100
*90^o External Corner Angel	1250 x 45 x 45
* Double Adjuster Panel	1250 x 225 1250 x 150

Slab Formwork

Floor / Slab Form		Back
	Manufactured out of 14 gauge sheets with pressed flanges and stiffner. Available in standard sizes of sizes of 1150 x 600, 900 x 600, 1150 x 300 & 900 x 300 mm. Other sizes available on request.
	Floor / Slab Form Adjusters eliminate use of cut pieces of timber, as these can fill up odd shapes of slab. Available in standard sizes of 1150 x 400, 900 x 400 and 600 x 400 mm.

Metriforms / Quick Forms

Metriform / Quick Form is the leading formwork system for the construction of concrete floors and walls. Minimal assembly and dismantling time coupled with a limited number of components highlight quick form as todays most cost-effective system.

Metriform incorporate the advantages of early striking (enabling early removal of formwork beams and panels while R.C.C. slab remains supported on props with drop-heads) which will dramatically increase output, whilst employing labour more efficiently. Metriform system can be used with props for concreting of slabs at ordinary heights, or with quiklok scaffolding for greater heights.
Minimal assemble and dismantling time coupled with advantage of early striking (Early removal of formwork with slab remaining supported on props with drop heads) makes Metriform/Quick form as todays most cost effective system. This gives dramatic results in increasing output and saving time & labour.

Metriform Beams with dropheads can be used with props for ordinary heights or with Quiklok Scaffolding system for greater heights of slab.

Components of Metriforms system manufactured by MCE are :-

	Metriform beams of sizes 1.2 m, 1.8 m and 2.5 m.
	Drophead for 38 / 70 mm deep Metriform Beam.
	Universal panels 38 mm /70 mm deep made out of 2 mm (14.g.) sheet with pressed flanges and stiffener of sizes 1155 x 600 m, 1150x 300 mm, 900x 600mm and 900x300 mm.
	Adjuster Panels 38 mm or 70 mm deep made of 2 mm (14.g) sheet with pressed flange of sizes 1150x400 mm, 900x400 mm and 600 x 400 mm. ** Special sizes of Universal Panels are also available on request.

Metriform Beam

Infill Beam

Drophead

Different sizes of Metriform beams makes this system suitable for different sizes of grids and use of special Metriform beams can allow early striking of even beam bottom formwork.

Working f Dopheads

Before Striking

After Striking

Other Products in 'Formwork' category

Steel Scaffolding

<< Back